On-vehicle Inspection |
|
Check The Auxiliary 12V Battery Terminals And Fuses
1. |
Check that the auxiliary 12V battery terminals are not loose or corroded. |
2. |
Check the fuses for continuity. |
Check Discharge Warning Light Circuit
1. |
Warm up the engine and then turn it off. |
2. |
Turn off all accessories. |
3. |
Turn the ignition switch "ON". Check that the discharge warning light is lit. |
4. |
Start the engine and Check that the light goes off. If the light does not go off as specified, then refer to the LDC diagnostics section for further diagnosis of auxiliary 12V battery charging system problem. |
Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the specific ...
Kia Niro 2017 (DE HEV) Service Manual: Battery Current Sensor Description and operation
Description
Built into the Power Relay Assembly (PRA), the Battery Current Sensor measures
the current of the high voltage battery while charging or discharging.
1. High Voltage Power Terminal (-)
2. High Voltage Power Terminal (+)
3. Battery Current Sensor ...