Kia Niro: Blade replacement / Rear window wiper blade

1. Raise the wiper arm and pull out the wiper blade assembly.

2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place.

3. Make sure the blade assembly is installed firmly by trying to pull it slightly.

To prevent damage to the wiper arms or other components, we recommend that the wiper blade be replaced by an authorized Kia dealer.

Front windshield wiper blade
Type A 1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip. CAUTION Do not allow the wiper arm to fall against the windshield, since it may chip or cra ...

Battery
...

Other information:

Kia Niro (DE HEV) Owners Manual: Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the others in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls d ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description The high voltage battery system consists of the BMS ECU (Battery Management System ECU), Power Relay Assembly (PRA), safety plug, battery temperature sensor, and battery ambient sensor. Especially the BMS ECU controls SOC (State Of Charge), power, cell balancing, cooli ...

© 2016-2019 www.kniro.net