Kia Niro: ESP(Electronic Stability Program) System / Rear Wheel Speed Sensor Components and components location

Front Wheel Speed Sensor Repair procedures

Removal 1. Remove the tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Rear Wheel Speed Sensor Repair procedures

Removal 1. Remove the tire. 2. Disconnect the wheel speed sensor connector (A). 3. Loosen the bearing bolts (A) ...

Other information:

Kia Niro (DE HEV) Owners Manual: Main fuse
If the main fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the nuts shown in the picture above. 4. Replace the fuse with a new one of the same rating. 5. Reinstall in the reverse order of removal ✽ NOTICE The elect ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Schematic diagrams
Hybrid Power Control Unit (HPCU) connector and high voltage cable Hybrid Power Control Unit (HPCU) terminal And Input/Output signal ECM Terminal Function Connector [C133-S] (94Pin) : HPCU signal input and control Terminal ...