Kia Niro: Body Side Molding / Rear Wheel Guard Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear tire.

2.

Remove the rear wheel guard (A), after loosening the mounting clips and nuts.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Front Wheel Guard Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Waist Line Molding Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description MAFS uses a sensing element made of a hot-film to measure the mass of intake air entering the engine and to send the signal to the ECM. A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents decelerati ...

Kia Niro 2017 (DE HEV) Service Manual: Ambient Temperature Sensor Repair procedures
Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. 1. Ambient sensor (+) 2. Sensor ground ...

© 2016-2019 www.kniro.net