Kia Niro: Interior Trim / Rear Transverse Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the luggage board (A).

2.

Disconnect the tailgate weatherstrip.

3.

Remove the rear transverse trim (A).

4.

Install in the reverse order of removal.

  

Make sure that the connector is plugged in properly.

Rear Transverse Trim Components and components location
Component Location 1. Rear transverse trim ...

Luggage Side Trim Components and components location
Component Location 1. Luggage side trim ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Washer Motor Repair procedures
Inspection Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    • Bef ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Check that the output voltage is within the specification. Pressure [kPa (kgf/cm², psi)] Output Voltage (V) [Verf=5V] ...

© 2016-2019 www.kniro.net