Kia Niro: Interior Trim / Rear Pillar Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Separate the rear seat belt lower anchor (A) after loosening the bolt.

2.

Remove the rear pillar trim (A) after loosening the mounting bolts.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Rear Pillar Trim Components and components location
Component Location 1. Rear pillar trim ...

Mirror
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. BMS ECU 2. Safety Plug 3. Main Relay (+) 4. Main Relay (-) 5. Pre-Charge Relay 6. Pre-Charge Resistor 7. Battery Current Sensor 8. Main Fuse [Safety Plug] 9. Battery Temperature Sensor 10. Battery Inlet T ...

Kia Niro (DE HEV) Owners Manual: Head lamp low beam (RHD)
1. Turn the low beam on without driver aboard. 2. The cut-off line should be projected in the cut-off line shown in the picture. 3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming. 4. If head lamp leveling device is equipped, adjust the head la ...

© 2016-2020 www.kniro.net