Kia Niro: Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures

Replacement
1.

Remove the rear door trim.

(Refer to Rear Door - "Rear Door Trim")

2.

Remove the rear door belt outside weatherstrip (A) after loosening the mounting screw.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Rear Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down the rear door window glass to the lowest level by pressing the power window glass switch. 2. Remove the rear door bel ...

Rear Door Side Weatherstrip Repair procedures
Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft) ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description EPS (Electric power steering, Column assist type) system is an engine operation independent steering system that uses an electric motor to assist the steering force. EPS control module controls the motor operation based on input signals from torque sensor and steerin ...

Kia Niro 2017 (DE HEV) Service Manual: Engine Control Module (ECM) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Disconnect the TCM connectors (A). 3. Disconnect the ECM connectors (B). 4. Remove ...

© 2016-2019 www.kniro.net