Kia Niro: Rear Seat Belt / Rear Center Seat Belt Retractor Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Center Seat Belt Retractor Repair procedures

Replacement
  

When installing the belt, be careful not to damage the retractor.

1.

Remove the rear seat back dust cover.

(Refer to Rear Seat - "Rear Seat Back Cover")

2.

Remove the rear center seat belt (A) after loosening the retractor mounting bolt.

3.

Install in the reverse order of removal.

  

Make sure the connector is plugged in properly.

Replace any damaged clips (or pin-type retainers).

Rear Center Seat Belt Retractor Components and components location
Component Location 1. Rear center seat belt retractor ...

Rear Seat Belt Buckle Components and components location
Component Location 1. Rear seat belt buckle [RH] 2. Rear seat belt buckle [LH] ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Release residual pressure in fuel line
Release Residual Pressure in Fuel Line    Whenever the high pressure fuel fuse, fuel pipe, delivery pipe, or injector is removed immediately after shutting off the engine, an injury may be caused by the relea ...

Kia Niro 2017 (DE HEV) Service Manual: Accelerator Position Sensor (APS) Description and operation
Description Installed on the accelerator pedal module, the Accelerator Position Sensor (APS) detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system. Therefore, each of the two sensors comprising the APS has indivi ...

© 2016-2020 www.kniro.net