Kia Niro: Rear Bumper / Rear Bumper beam Assembly Components and components location
Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Components and components location
| Component Location |
|
1. Rear bumper beam assembly |
|
Rear Bumper Cover Repair procedures
Replacement
Put on gloves to protect your hands.
...
Rear Bumper beam Assembly Repair procedures
Replacement
Put on gloves to protect your hands.
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Repair procedures
Inspection
[Motor]
1.
Switch "OFF" the ignition.
2.
Disconnect the EEGR valve connector.
3.
Check if the EEGR valve is stuck by foreign material.
4.
Measure the resistance between 1 a ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Adjustment
Inspect Glass Alignment
1.
Inspect the step height between the roof panel (A) and the glass weatherstrip
(B) and then adjust it if necessary.
Alignment adjustment
Standard value [mm(in.)]
(1) Front edge : 0 mm (0 in.)
...
© 2016-2024 www.kniro.net
