Kia Niro: Rear Seat / Rear Back Armrest Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear door module.

(Refer to Rear Door - "Rear Door Module")

2.

Remove the rear back armrest (A) after loosening the cap & bolt.

3.

Remove the rear back armrest board (A) after loosening the screws.

4.

Install in the reverse order of removal.

  

Make sure that the connectors are plugged in properly.

Replace any damaged clips.

Rear Back Armrest Components and components location
Component Location 1. Rear back armrest ...

Rear Seat Belt
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Transverse Trim Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro (DE HEV) Owners Manual: Operation tips
For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. Before driving, clear all snow and ice fro ...

© 2016-2019 www.kniro.net