Kia Niro: Engine Control System / Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS during idle at various engine speeds. ...

Accelerator Position Sensor (APS) Specifications
Specification Accelerator Position Output Voltage (V) [Vref = 5V] APS1 APS2 C.T 0.7 - 0.8 ...

Other information:

Kia Niro (DE HEV) Owners Manual: Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to your country’s regulations and that it is properly installed and operating correctly. If your trailer weight exceeds the maximum allowed weight without trailer brakes, then the trailer will also require its own brakes ...

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Indicator Repair procedures
Removal Blind Spot Detection Warning Indicator 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder. 3. Disconnect the mirror heated connector (B) and BSD ...

© 2016-2019 www.kniro.net