Kia Niro: Hybrid Motor Cooling System / Radiator Components and components location

Components Location

1. Radiator
2. Drain plug
3. Radiator lower hose
4. Radiator upper hose

Description and operation
Description The Hybrid Power Control Unit (HPCU) uses various semiconductors that are supplied with high voltage, hence generating more heat than engine combustion devices. Overheating ...

Radiator Repair procedures
Removal 1. Disconnect the negative (-) cable of the 12V battery. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine ...

Other information:

Kia Niro (DE HEV) Owners Manual: Temperature control
The temperature will increase to the maximum by turning the knob to the extreme right. The temperature will decrease to the minimum by turning the knob to the extreme left. When turning the knob, the temperature will increase or decrease by 0.5°C/1°F. When set to the lowest temperature s ...

Kia Niro 2017 (DE HEV) Service Manual: Ambient Temperature Sensor Description and operation
Description Located at the front of the condenser, the ambient temperature sensor detects the ambient air temperature. It is a negative type thermistor; resistance will increase at lower temperature and decrease at higher temperature. The sensor output is used to control discharge ...

© 2016-2020 www.kniro.net