Kia Niro: Brake system / Power brakes
Your vehicle's brake system is powerassisted by the electric hydraulic pump.
In the event the brakes lose power because of a brake control system malfunction,
unstable power supply or some other reason, you can still stop your vehicle by applying
greater force to the brake pedal than you normally would. The stopping distance,
however will be longer. Please have the system checked as soon as possible.
If the brake pedal does not return to its normal position when released, there
may be a malfunction in the brake system. We recommend that you contact an authorized
Kia dealer.
WARNING - Brakes
- Do not drive with your foot resting on the brake pedal. This will create
abnormal high brake temperatures, excessive brake lining and pad wear, and increased
stopping distances.
- When descending a long or steep hill, shift to a lower gear and avoid
continuous application of the brakes. Continuous brake application will cause
the brakes to overheat and could result in a temporary loss of braking performance.
- Wet brakes may impair the vehicle’s ability to safely slow down; the
vehicle may also pull to one side when the brakes are applied. Applying the
brakes lightly will indicate whether they have been affected in this way.
Always test your brakes in this fashion after driving through deep water.To
dry the brakes, apply them lightly while maintaining a safe forward speed until
brake performance returns to normal.
- Always, confirm the position of the brake and accelerator pedal before
driving. If you don’t check the position of the accelerator and brake pedal
before driving, you may depress the accelerator instead of the brake pedal.
It may cause a serious accident.
✽ NOTICE
- Do not depress the brake pedal continuously without the " " indicator
ON. The battery may be discharged.
- Some noise and vibration may occur during braking. This is normal.
- In below cases, some electric brake pump noise and motor vibration may
occur temporarily.
This is normal operation.
- When the pedal is pushed down very quickly
- When the pedal is pushed down multiple times in short intervals
- When the ABS function is activated during braking
When your brake pads are worn and new pads are required, you will hear a high-pitched
warning sound from your front brakes or rear brakes (if equipped). You may hear
this sound come and go or it m ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
The High Voltage Battery System provides the hybrid drive motor, HSG, and electric
A/C compressor with electric energy and also reserves the electric energy generated
during regeneration braking. It consists of the battery pack assembly, BMS ECU,
power relay assembly, ...
Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine
forced activation mode
If the engine needs to be running constantly while the vehicle is stopped to
inspect emission gas or perform maintenance on the vehicle, follow below procedure
to enter engine forced activation mode.
1.
Place ...