Toyota Corolla: Driving procedures / Parking brake

Operating instructions

Toyota Corolla. Parking brake

A - U.S.A. B - Canada

1 To set the parking brake, fully pull the parking brake lever while depressing the brake pedal.

2 To release the parking brake, slightly raise the lever and lower it completely while pressing the button.

■Parking brake engaged warning buzzer

If the vehicle is driven at a speed of approximately 3 mph (5 km/h) or more with the parking brake engaged, a buzzer will sound.

“Release Parking Brake” will be displayed on the multi-information display.

NOTICE

Before driving

Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.

Turn signal lever
Operating instructions 1 Right turn 2 Lane change to the right (move the lever partway and release it) The right hand signals will flash 3 times. 3 Lane change to the left (move the lever partway and ...

Electric parking brake
The parking brake can be set or released automatically or manually. In automatic mode, the parking brake can be set or released automatically. Also, even in automatic mode, the parking brake can be s ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Audio Unit Components and components location
Components [RADIO/CD/MP3] Connector Pin Information No. Connector A Connector B 1 Rear left speaker (+) - 2 Rear left speaker (-) MIC (+) ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor. 3. Head a light to the rearward-faci ...

© 2016-2022 www.kniro.net