Kia Niro: Mirror / Outside Rear View Mirror Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Using a remover, remove the front door quadrant inner cover (A).

2.

Disconnect the outside rear view mirror connector (A) and loosen the mounting bolts.

Tightening torque :

6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

3.

Remove the outside rear view mirror (A).

4.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Outside Rear View Mirror Components and components location
Component Location 1. Outside rear view mirror ...

Inside Rear View Mirror Components and components location
Component Location 1. Inside rear view mirror ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: TPMS Sensor Description and operation
Description 1. Function • By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF. • Wheel location is recognized by compar ...

Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive Motor, Inverter, HSG, LD ...

© 2016-2020 www.kniro.net