Toyota Corolla: Headlight switch / Operating instructions

Operating the Toyota Corolla. Operating instructions switch turns on the lights as follows:

Toyota Corolla. Operating instructions

A - U.S.A.

B - Canada

1 Toyota Corolla. Operating instructions The headlights, daytime running lights (®P.186) and all the lights listed below turn on and off automatically.

2 Toyota Corolla. Operating instructions The side marker, parking, LED accent (if equipped), tail, license plate, instrument panel lights, and daytime running lights (®P.186) turn on.

3 Toyota Corolla. Operating instructions The headlights and all lights listed above (except daytime running lights) turn on.

4 Toyota Corolla. Operating instructions(U.S.A.) Off

Toyota Corolla. Operating instructions (Canada) The daytime running lights turn on.

■AUTO mode can be used when

The engine switch is in ON.

■Daytime running light system

*: When the surroundings are bright The daytime running lights remain on after they illuminate, even if the parking brake is set again.

The daytime running lights remain on after they illuminate, even if the parking brake is set again.

■Headlight control sensor

Toyota Corolla. Operating instructions

The sensor may not function properly if an object is placed on the sensor, or anything that blocks the sensor is affixed to the windshield. Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction.

■Automatic light off system

To turn the lights on again, turn the engine switch to ON, or turn the light switch off once and then back to or .

■Light reminder buzzer

A buzzer sounds when the engine switch is turned to OFF or ACC and the driver’s door is opened while the lights are turned on.

■Automatic headlight leveling system

The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users.

■Windshield wiper linked headlight illumination

When driving during daytime with the headlight switch turned to , if the windshield wipers are used, the headlights will turn on automatically after several seconds to help enhance the visibility of your vehicle.

■Battery-saving function

In order to prevent the battery of the vehicle from discharging, if the headlights and/or tail lights are on when the engine switch is turned off the battery saving function will operate and automatically turn off all the lights after approximately 20 minutes. When the engine switch is turned to ON, the battery-saving function will be disabled. When any of the following are performed, the battery-saving function is canceled once and then reactivated. All the lights will turn off automatically 20 minutes after the Battery- saving function has been reactivated:

■Customization

Some functions can be customized.

NOTICE

■To prevent battery discharge

Do not leave the lights on longer than necessary when the engine is not running.

Headlight switch
The headlights can be operated manually or automatically. ...

Turning on the high beam (®P.581) headlights
1 With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. 2 Pull the lever toward you and release ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Brake Pedal Components and components location
Components 1. Pedal stroke sensor 2. Stop lamp switch 3. Brake pedal arm ...

Kia Niro 2017 (DE HEV) Service Manual: Battery Pack Assembly Specifications
Specification Battery Pack Assembly [General Specification] Item Specification Remarks Number of Cells 16 Cells × 4 Modules [64 Cell] 1 Cell = 3.75 V Type LiPB (Lithium ion P ...

© 2016-2022 www.kniro.net