Kia Niro: Ignition switch position / ON

The warning lights can be checked before the engine is started. This is the normal running position after the engine is started.

Do not leave the ignition switch ON if the engine is not running to prevent battery discharge.

ACC (Accessory)
The steering wheel is unlocked and electrical accessories are operative. ✽ NOTICE If difficulty is experienced turning the ignition switch to the ACC position, turn the key while turning the ste ...

START
Turn the ignition key to the START position to start the engine. The engine will crank until you release the key; then it returns to the ON position. The brake warning lamp can be checked in this ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Wiper Motor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius (A) of wiper arm. 3. Remove the co ...

Kia Niro 2017 (DE HEV) Service Manual: Brake Actuation Unit Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Disconnect the TCM connector. (Refer to DCT (Dual Clutch Transmission) System - "DCT Control Module (TCM)) 3. Disco ...

© 2016-2019 www.kniro.net