Kia Niro: Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.

Remove the oil level gauge (A).

2.

Remove the timing chain cover.

(Refer to Timing System - "Timing Chain Cover")

3.

Remove the Oil level gauge pipe (A).

Tightening torque :

8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft)

4.

Install in the reverse order of removal.

Oil Pressure Switch Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. (Refer to Engine and Transaxle As ...

Timing System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Pillar Trim Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) is one of the most important sensors of the engine control system that detects the crankshaft position. Lack of CKPS signal may cause the engine to stop. This sensor is installed in ladder frame and generates alternating current by m ...

© 2016-2021 www.kniro.net