Kia Niro: Hybrid Motor Control System / Motor Temperature Sensor Repair procedures

Inspection

Hybrid Drive Motor

1.

Inspect the temperature sensor resistance.

Item
Pin
Specification
Remarks
Resistance
(Temperaturesensor)
4 - 8
10.92 - 13.44 kΩ
At room temperature 68°F (20°C)

2.

If the temperature sensor needs to be replaced, replace the hybrid drive motor assembly.

(Refer to Hybrid Motor Assembly - "Hybrid Drive Motor Assembly")

Hybrid Starter Generator (HSG)

1.

Inspect the temperature sensor resistance.

Item
Pin
Specification
Remarks
Resistance
(Temperaturesensor)
4 - 9
121.6 - 133.14 kΩ
At room temperature 68°F (20°C)

2.

If the temperature sensor needs to be replaced, replace the HSG assembly.

(Refer to Hybrid Motor Assembly - "Hybrid Starter Generator")

Motor Temperature Sensor Circuit diagram
Part Circuit Diagram [Hybrid Drive Motor] [HSG] ...

Hybrid Motor Cooling System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Headlamp Leveling Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad plate [LH] (A) after loosening the screws. ...

Kia Niro 2017 (DE HEV) Service Manual: General safety information and caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries. • ...

© 2016-2018 www.kniro.net