Removal |
1. |
Before removing the driver side seat assembly, pull it upward to the maximum by pushing the front seat height adjusting switch (A).
|
2. |
Disconnect the negative (-) battery terminal |
3. |
Remove the driver front seat assembly. (Refer to Body - "Front Seat Assembly") |
4. |
Disconnect the IMS unit connectors (A).
|
5. |
Remove the IMS unit (A) after loosening the mounting screws.
|
Installation |
1. |
Install the memory power seat unit. |
2. |
Install the driver front seat assembly. |
3. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Rear Door Belt Outside Weatherstrip Repair procedures
Replacement
1.
Pull down the rear door window glass to the lowest level by pressing
the power window glass switch.
2.
Remove the rear door belt outside weatherstrip (A) after loosening the
mounting screw.
3.
...
Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure t ...