Kia Niro: Engine compartment fuse replacement / Main fuse

If the main fuse is blown, it must be removed as follows:

1. Turn off the engine.

2. Disconnect the negative battery cable.

3. Remove the nuts shown in the picture above.

4. Replace the fuse with a new one of the same rating.

5. Reinstall in the reverse order of removal

✽ NOTICE

The electronic system may not function correctly even when the engine room and internal fuse box's individual fuses are not disconnected. In such case the cause of the problem may be disconnection of the main fuse (BFT type), which is located inside the positive battery terminal (+) cap. Since the main fuse is designed more intricately than other parts, please visit the nearest Kia dealer and service center.

CAUTION

Visually inspect the battery cap for secure closing. If the battery cap is not securely latched, the electrical system may be damaged to due influx of moisture into the system.

Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Disconnect the negative battery cable. 2. Remove the nuts shown in the picture above. 3. Replace the fuse with a new one of the same ...

Fuse/relay panel description
■ Driver’s side fuse panel ■ Engine compartment fuse panel ■ Engine compartment fuse panel (Battery terminal cover) Inside the fuse/relay panel covers, you can find the fuse/relay lab ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Replacement    • Be careful not to damage the fender and body. • Use a plastic panel removal tool to remove interior trim pieces without marring ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Starter Generator(HSG) Specification
Specification Item Specification Type PMSM (Interior Permanent Magnet Synchronous Motor) Max. output 8.0 kW / 2160 - 12000 rpm Max. torque 35.3 N·m / 0 - 2160 rpm ...

© 2016-2021 www.kniro.net