Kia Niro: Light bulbs / License plate lamp bulb replacement

Kia Niro (DE HEV) Owners Manual / Maintenance / Light bulbs / License plate lamp bulb replacement

1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.

2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

3. Remove the bulb from bulb-socket by pulling it out.

4. Insert a new bulb by inserting it into the bulb-socket.

5. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.

6. Align the lens cover tabs with the lamp housing notches and snap the lens into place.

High mounted stop lamp bulb replacement
If the high mounted stop lamp (LED) does not operate, we recommend that you checked an authorized Kia dealer. ...

Side repeater lamp (LED type) bulb replacement
If the side repeater lamp (LED type) does not operate, we recommend that you checked an authorized Kia dealer. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Center Seat Belt Retractor Repair procedures
Replacement    When installing the belt, be careful not to damage the retractor. 1. Remove the rear seat back dust cover. (Refer to Rear Seat - "Rear Seat Back Cover") ...

Kia Niro (DE HEV) Owners Manual: Anti-lock Brake System (ABS) Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the ABS (The normal braking system will still be operational without the assi ...

© 2016-2019 www.kniro.net