Kia Niro: Lighting System / License Lamps Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the license lamp assembly (A) after pressing the locking pin.
|
| 3. |
Disconnect the license lamp connector (A).
|
| 4. |
Remove the license lamp bulb (B) after removing the license lamp socket (A).
|
| Installation |
| 1. |
Install the license lamp bulb. |
| 2. |
Connect the license lamp connector. |
| 3. |
Install the license lamp assembly. |
| 4. |
Connect the negative (-) battery terminal. |
Front Fog Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
High Mounted Stop Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler")
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the vehicle in the back and senses and sets off
(visual and auditory) alarms for any vehicle coming into the blind spot.
–
Blind Spot ...
Kia Niro (DE HEV) Owners Manual: TPMS (Tire Pressure Monitoring System) malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System.
We recommend that the system be checked by an authorized Kia dealer to determine
the cause of the problem.
✽ NOTICE
If there is a m ...