Kia Niro: Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal
  

When replacing the LDWS switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.

1.

Disconnect the negative (-) battery terminal.

2.

Using a screwdriver or remover, remove the mirror wiring cover (A).

3.

Disconnect the LDWS unit connector (A).

4.

Remove the LDWS unit (B) by pulling out lock pins (A).

  

When pulling out the mounting bracket (A), be careful not to damage it.

Installation
1.

Install the LDWS unit.

2.

Connect the LDWS unit connector.

3.

Install the mirror wiring cover.

4.

Connect the negative (-) battery terminal.

Lane Departure Warning System (LDWS) Unit Components and components location
Components ...

Lane Keeping Assist System (LKAS)
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Washer Switch Repair procedures
Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel pressure test (low pressure system)
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Inspection - "Release Residual Pressure in Fuel Line").    ...

© 2016-2019 www.kniro.net