Kia Niro: Dual Clutch Transmission Control System / Inhibitor Switch Specification

Kia Niro 2017 (DE HEV) Service Manual / DCT(Dual Clutch Transmission) System / Dual Clutch Transmission Control System / Inhibitor Switch Specification

Specification

Item	Specification
Power supply	12 V
Output type	Combination of output signals

Signal Code Table

	P	P-R	R	R-N	N	N-D	D
Signal "1"	12V	12V	0	0	0	0	0
Signal "2"	0	12V	12V	12V	0	0	0
Signal "3"	0	0	0	12V	12V	12V	0
Signal "4"	0	0	0	0	0	12V	12V

Inhibitor Switch Components and components location

Component Location 1. Inhibitor switch 2. Manual control lever ...

Inhibitor Switch Description and operation

Description • The inhibitor switch is installed on top of transmission, and is connected to the shift lever through shift cable. • Inhibit ...

Other information:

Kia Niro (DE HEV) Owners Manual: Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly. 2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 3. Make sure the blade assembly is installed firmly by trying to pull it slightly. To prevent damage to the ...

Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine forced activation mode If the engine needs to be running constantly while the vehicle is stopped to inspect emission gas or perform maintenance on the vehicle, follow below procedure to enter engine forced activation mode. 1. Place ...