Kia Niro: Air Conditioning System / In-car Sensor Description and operation

Description

The in-car air temperature sensor is built into the heater & A/C control unit.

The sensor consists of a thermistor that measures the temperature inside the vehicle. The signal decided by the resistance that varies with the perceived inside temperature, is delivered to the heater control unit, based on which the unit regulates the in-car temperature to intended value.

Evaporator Temperature Sensor Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the evaporator temperature sensor connector. 3. Measure ...

In-car Sensor Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using a remover, remove the crash pad side cover [RH] (A). ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Components and components location
Components 1. Hybrid Control Unit(HCU) [HPCU] 2. Inverter [HPCU] 3. Low Voltage DC/DC Converter (LDC) [HPCU] 4. High voltage connector (↔ High voltage battery system assembly) 5. High voltage connector (↔ Hybrid drive motor assembly) 6. H ...

Kia Niro (DE HEV) Owners Manual: Virtual Engine Sound System (VESS)
The Virtual Engine Sound System generates an engine sound for pedestrians to hear vehicle while at low speeds in EV mode. Hybrid battery air intake The hybrid battery air intake is located on bottom the rear seats. The air intake cools down the hybrid battery. When the hybrid battery air int ...

© 2016-2019 www.kniro.net