Kia Niro: Ignition System / Ignition Coil Schematic diagrams

Circuit Diagram

Ignition Coil Connector Terminal Function
Connector View

Ignition Coil Terminal Function

Ignition Coil (Cylinder #1)

Pin No.
Description
Connected to
1
Ground
Chassis
2
ignition Coil #1 Control
ECM Connector [K] (87)
3
-
 
4
Battery power (B+)
Main Relay

Ignition Coil (Cylinder #2)

Pin No.
Description
Connected to
1
Ground (-)
Chassis
2
ignition Coil #2 Control
ECM Connector [K] (64)
3
-
 
4
Battery power (B+)
Main Relay

Ignition Coil (Cylinder #3)

Pin No.
Description
Connected to
1
Ground (-)
Chassis
2
ignition Coil #3 Control
ECM Connector [K] (65)
3
-
 
4
Battery power (B+)
Main Relay

Ignition Coil (Cylinder #4)

Pin No.
Description
Connected to
1
Ground (-)
Chassis
2
ignition Coil #4 Control
ECM Connector [K] (86)
3
-
 
4
Battery power (B+)
Main Relay

Ignition Coil Description and operation
Description An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spar ...

Ignition Coil Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the engine cover. 3. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Main Relay (+) / (-) Description and operation
Description Main Relay is divided into the positive (+) relay and negative (-) relay. It is integrated into the Power Relay Assembly (PRA) and connects the power supply line and ground line between the high voltage battery and the inverter in accordance with the BMS ECU control si ...

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. If this alignment is not performed as in illustration below, it may cause degradation of ...

© 2016-2019 www.kniro.net