Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Specification

Hybrid Power Control Unit (HPCU)

Item
Specification
Operating Voltage (V)
204 - 275.2
Operating Frequency (Hz)
Max. 826
LDC Output Voltage (V) [Auxiliary 12V Battery]
12.8 - 15.1
LDC Rated Power (kW)
1.8
Cooling Method
Water-cooled

Description and operation
Description The HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface. In addition this sys ...

Hybrid Power Control Unit (HPCU) Components and components location
Components 1. Hybrid Control Unit(HCU) [HPCU] 2. Inverter [HPCU] 3. Low Voltage DC/DC Converter (LDC) [HPCU] 4. High voltage connector (↔ High voltage batte ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Clutch Actuator Assembly Repair procedures
Removal 1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Disconect the clutch actuator connector (A) and then remove the fork cover (B). Tightening torque : ...

Kia Niro 2017 (DE HEV) Service Manual: Emergency Signal System Description and operation
Description Introduction of quick brake warning system (ESS) In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear. 1. Basic function (Blinking the brake lamp/emergency lamp) – ...

© 2016-2020 www.kniro.net