Kia Niro: Hood / Hood Weatherstrip Repair procedures

Replacement
1.

Remove the hood weatherstrip (A).

  

Be careful not to damage the hood and body.

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).    ...

Hood Latch Release Handle Components and components location
Component Location 1. Hood latch release handle ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Disc Brake Components and components location
Components 1. Return spring 2. Operating lever 3. Stopper 4. Caliper body 5. Caliper carrier 6. Pad retainer 7. Brake pad ...

Kia Niro (DE HEV) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 minutes), stop at a suitable location. 2. • Connect connection hose (10) of the compressor directly to the tire valve. (18 inch tire only) • Connect the filling hose (3) of the compressor (clip mounted side) directly and then ...

© 2016-2020 www.kniro.net