Kia Niro: Hood / Hood Latch Release Handle Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement
1.

Using a remover, remove the hood release handle (A).

2.

Install in the reverse order of removal.

  

Make sure the hood latch cable is connected properly.

Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Components and components location
Component Location 1. Hood latch release handle ...

Hood Latch Components and components location
Component Location 1. Hood lower latch assembly ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Drive Belt Tensioner Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the mechanical tensioner (A). Tightening torque : 18.6 - 23.5 N·m (1.9 - 2.4 kgf·m, 13.7 - 17.4 lb ...

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the auto defogging sensor connector. 3. Connect the power (+) terminal to mode actuator connector terminal 3, and ground the negative (-) terminal to t ...

© 2016-2018 www.kniro.net