Kia Niro: Lighting System / High Mounted Stop Lamp Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear spoiler.

(Refer to Body - "Rear Spoiler")

3.

Remove the high mounted stop lamp cover.

4.

Remove the high mounted stop lamp (A) after loosening the mounting screws.

Installation
1.

Install the high mounted stop lamp.

2.

Install the high mounted stop lamp cover.

3.

Install the rear spoiler.

4.

Connect the negative (-) battery terminal.

License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. ...

Rear Combination Lamp Repair procedures
Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the rear com ...

Other information:

Kia Niro (DE HEV) Owners Manual: To resume cruise control set speed
If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you move the lever up (to RES+). If you move the lever up (to RES+), the speed will resume to the recently set speed. When the sp ...

Kia Niro (DE HEV) Owners Manual: Anti-lock Brake System (ABS) Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the ABS (The normal braking system will still be operational without the assi ...

© 2016-2019 www.kniro.net