Kia Niro: Steering wheel / Heated steering wheel
With the ignition switch in the ON position or engine start/stop button in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate.
To turn the heated steering wheel off, press the button once again. The indicator on the button will turn off.
✽ NOTICE
The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.
CAUTION
Do not install any grip to operate the steering wheel. This causes damage to the heated steering wheel system.
Tilt & telescopic steering
A tilt and telescopic steering wheel allows you to adjust the steering wheel
before you drive.You can also raise it to give your legs more room when you exit
and enter the vehicle.
The steering w ...
Horn
To sound the horn, press the area indicated by the horn symbol on your steering
wheel (see illustration). The horn will operate only when this area is pressed.
Check the horn regularly to be sur ...
Other information:
Peugeot 2008 2019-2021 Owner's Manual: Stop & Start
The Stop & Start function puts the engine temporarily into standby - STOP
mode - during phases when the vehicle is stopped (red lights, queues, etc.). The
engine restarts automatically - START mode - as soon as the driver wishes to
move off again.
Primarily designed for urban use, the functio ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Schematic diagrams
Hybrid Power Control Unit
(HPCU) connector and high voltage cable
Hybrid Power Control Unit
(HPCU) terminal And Input/Output signal
ECM Terminal Function
Connector [C133-S]
(94Pin) : HPCU signal input and control
Terminal
...