Kia Niro: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Specification

HO2S [Bank 1/Sensor 1] (Linear)

Item
Specification
Heater Resistance (Ω)
2.5 - 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2] (Binary type)

Item
Specification
Heater Resistance (Ω)
Approx. 9.0 [20°C(68°F)]

Knock Sensor (KS) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Remove the intake manifold. (Refer to Engi ...

Heated Oxygen Sensor (HO2S) Description and operation
Description Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect the air/ ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Water jacket insert 2. Cylinder block 3. Oil ring 4. Rear oil seal 5. Crankshaft upper bearing 6. Thrust bearing 7. Crankshaft 8. Pilot bearing 9. Crankshaft lower bearing 10. Crankshaft lower bearing cap 11. ...

Kia Niro (DE HEV) Owners Manual: Tilt & telescopic steering
A tilt and telescopic steering wheel allows you to adjust the steering wheel before you drive.You can also raise it to give your legs more room when you exit and enter the vehicle. The steering wheel should be positioned so that it is comfortable for you to drive, while permitting you to see ...

© 2016-2020 www.kniro.net