Kia Niro: Lighting / Headlight leveling device

To adjust the headlight beam level according to the number of passengers and loading weight in the luggage area, turn the beam leveling switch.

The higher the number of the switch position, the lower the headlight beam level. Always keep the headlight beam at the proper leveling position, or headlights may dazzle other road users.

Listed below are the examples of proper switch settings. For loading conditions other than those listed below, adjust the switch position so that the beam level may be the nearest as the condition obtained according to the list.

Rear fog light
To turn the rear fog lights on, turn the headlight switch to the headlight on position and turn the rear fog light switch (1) to the on position. The rear fog lights turn on when the rear fog lig ...

Wipers and washers
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
General Inspection Before and after servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspe ...

Peugeot 2008 2019-2021 Owner's Manual: Stop & Start
The Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stopped (red lights, queues, etc.). The engine restarts automatically - START mode - as soon as the driver wishes to move off again. Primarily designed for urban use, the functio ...

© 2016-2021 www.kniro.net