Peugeot 2008: Driving / Gear efficiency indicator

Peugeot 2008 2019-2021 Owner's Manual / Driving / Gear efficiency indicator

This system helps reduce fuel consumption by recommending the most appropriate gear.

Operation

Depending on the driving situation and the vehicle's equipment, the system may advise skipping one or more gears.

Gear engagement recommendations are only optional. In fact, the configuration of the road, the traffic density and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible for deciding whether or not to follow the system’s advice.

This function cannot be deactivated.

Peugeot 2008. Gear efficiency indicator With an automatic gearbox, the system is only active in manual operation.

Peugeot 2008. Gear efficiency indicator The information appears in the instrument panel in the form of an arrow and the recommended gear.

Peugeot 2008. Gear efficiency indicator The system adapts its gear shift recommendation according to the driving conditions (slope, load, etc.) and the driver’s requirements (power, acceleration, braking, etc.).

The system never suggests:

engaging first gear,

engaging reverse.

Hill start assist
This system keeps your vehicle briefly stationary (for approximately 2  seconds) when making a hill start, while you transfer your foot from the brake pedal to the accelerator pedal. This syste ...

Stop & Start
The Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stopped (red lights, queues, etc.). The engine restarts automatically - START m ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Brake Pedal Components and components location
Components 1. Pedal stroke sensor 2. Stop lamp switch 3. Brake pedal arm ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description The Hybrid Power Control Unit (HPCU) uses various semiconductors that are supplied with high voltage, hence generating more heat than engine combustion devices. Overheating can decrease the efficiency of control devices, restrict proper operation and melt semiconductor ...

© 2016-2021 www.kniro.net