Kia Niro: Dual Clutch Transmission Control System / Gear Actuator Assembly Specification

Specification
Item
Specification
Resistance (line to line)
Shift motor 1/2
126.4 mΩ ± 10%
Select solenoid 1/2
0.7 Ω ± 10 %
Max. current
Shift motor 1/2
45 A
Select solenoid 1/2
20 A
Select solenoid sensor output
Push
4.0  ± 0.15 V
Pull
1.0 ± 0.15 V
Operating condition
-40 to 257 ° F (-40 to 125 ° C)
Rated voltage
13 V
Sensor supply voltage
8.75 V

Gear Actuator Assembly Components and components location
Component Location 1. Gear actuator assembly 2. Shift motor 2 (Even) 3. Shift motor 1 (Odd) 4. Select solenoid 2 (Even) 5. Select solenoid 1 (Odd) ...

Gear Actuator Assembly Description and operation
Description • The gear actuator comprises the shift motor and select solenoid. • Gear actuator shift motor and select solenoid use signals fro ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. [Throttle Position Sensor (TPS)] ...

Toyota Corolla 2019-2022 Owners Manual: Vanity mirrors
Slide the cover to open. The vanity light turns on. (if equipped) ■ To prevent battery discharge (vehicles with vanity lights) If the vanity lights remain on when the engine switch is OFF, the lights will go off automatically after 20 minutes. NOTICE ■ To prevent the battery from being dischar ...

© 2016-2022 www.kniro.net