Kia Niro: Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and operation

Description

Installed on top of the low pressure fuel pump, the Fuel Pressure Sensor (FPS) measures the pressure in the low pressure fuel line.

Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the low pressure fuel pump. After activating the low pressure fuel pump, the FPS continues to send the fuel pressure to the FPCM and the FPCM keeps controlling the fuel flow rate using the feedback from the FPS.

Fuel Pressure Sensor (FPS) Specifications
Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) [Vref = 5V] 50 (0.51, 7.3) 0.3 600 (6.12, 87.0) ...

Fuel Pressure Sensor (FPS) Schematic diagrams
Circuit Diagram Fail-Safe Mode Item Fail-Safe Output Voltage (V) 12    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Main Relay (+) / (-) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

Kia Niro 2017 (DE HEV) Service Manual: Front Impact Sensor (FIS) Description and operation
Description • The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indica ...

© 2016-2020 www.kniro.net