Kia Niro: Fuel Filler Door / Fuel Filler Door Release Actuator Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Release Actuator Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the left luggage side trim.

(Refer to Body - "Luggage Side Trim")

3.

Disconnect the fuel filler door release actuator connector (A).

4.

Remove the fuel filler door housing.

(Refer to Body - "Fuel Filler Door")

5.

Remove the fuel filler door release actuator (A) after loosening the mounting bolts.

Installation
1.

Install the fuel filler door release actuator.

2.

Install the fuel filler door housing.

3.

Connect the fuel filler door release actuator connector.

4.

Install the left luggage side trim.

5.

Connect the negative (-) battery terminal.

Inspection
1.

Check for continuity between terminals No. 2 and No. 4. If there is no continuity, replace the fuel filler door release actuator.

Components and components location
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

Fuel Filler Door Open Switch Components and components location
Components ...

Other information:

Kia Niro (DE HEV) Owners Manual: Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. 1. Manufacturer or brand name Manufacturer or Brand na ...

Kia Niro 2017 (DE HEV) Service Manual: Side Impact Sensor (SIS) Repair procedures
Removal Pressure side impact sensor (P-SIS) 1. Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. 2. Remove the front door trim. (Refer to Body (Interior and Exterior) - "Front Do ...

© 2016-2019 www.kniro.net