Kia Niro: Body Side Molding / Front Wheel Guard Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Body Side Molding / Front Wheel Guard Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the front tire.

2.	Remove the front wheel guard (A), after loosening the mounting clips and nuts.

Install in the reverse order of removal.

Replace any damaged clips.

Quarter Garnish Repair procedures

Replacement Put on gloves to protect your hands. ...

Rear Wheel Guard Repair procedures

Replacement Put on gloves to protect your hands. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Auto control
The rain sensor (A) located on the upper end of the windshield glass senses the amount of rainfall and controls the wiping cycle for the proper interval. The more it rains, the faster the wiper operates. When the rain stops, the wiper stops. To vary the speed setting, turn the speed control k ...

Kia Niro (DE HEV) Owners Manual: Explanation of scheduled maintenance items
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. HSG (Hybrid starter & generator) belt The HSG belt should be ch ...