Kia Niro: Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement
1.

Remove the front seat assembly.

(Refer to Front Seat - "Front Seat Assembly")

2.

Remove the front seat belt buckle (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

  

Make sure that the connector is plugged in properly.

Replace any damaged clips.

Front Seat Belt Buckle Components and components location
Component Location 1. Front seat belt buckle ...

Hood
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Oil Seal Repair procedures
Replacement    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety i ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Door Module Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

© 2016-2021 www.kniro.net