Kia Niro: Interior Trim / Front Pillar Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Using a remover, remove the front pillar trim (A).

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Once the front piller trim has been removed, replace the clip (A) with a new one.

Front Pillar Trim Components and components location
Component Location 1. Front pillar trim ...

Center Pillar Trim Components and components location
Component Location 1. Center pillar lower trim 2. Center pillar upper trim ...

Other information:

Kia Niro (DE HEV) Owners Manual: Stop and tail lamp bulb replacement
1. Open the tailgate. 2. Open the service cover. 3. Loosen the light assembly retaining screws with a cross-tip screwdriver. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Disconnect the rear combination lamp connector. 6. Remove the socket from the assembly ...

Kia Niro 2017 (DE HEV) Service Manual: Variable Force Solenoid (VFS) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Disconnect the VFS connector (A). 3. Remove the mounting bolts (B), and then remove the VFS from the engine. ...

© 2016-2021 www.kniro.net