Kia Niro: SRSCM / Front Impact Sensor (FIS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and operation

Description

The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

They are remote sensors that detect acceleration due to a collision at its mounting location.

The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the battery (-) cable.    Disconnect the battery negative ...

Front Impact Sensor (FIS) Components and components location
Components ...

Other information:

Kia Niro (DE HEV) Owners Manual: Low Tire Pressure Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When one or more of your tires are significantly underinflated. ❈ For more details, refer to “Tire Pressur ...

Kia Niro 2017 (DE HEV) Service Manual: Shift Cable Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

© 2016-2019 www.kniro.net