Kia Niro: Lighting / Front fog light

Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow, etc. The fog lights will turn on when the fog light switch (1) is turned on after the parklight is turned on.

To turn off the fog lights, turn the fog light switch (1) to the OFF position.

CAUTION

When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor.

One-touch lane change function
To activate an one-touch lane change function, move the turn signal lever slightly for less than 0.7 second and then release it. The lane change signals will blink 3 times. ✽ NOTICE If an indi ...

Rear fog light
To turn the rear fog lights on, turn the headlight switch to the headlight on position and turn the rear fog light switch (1) to the on position. The rear fog lights turn on when the rear fog lig ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description MAFS uses a sensing element made of a hot-film to measure the mass of intake air entering the engine and to send the signal to the ECM. A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents decelerati ...

Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Description and operation
Description The Electric EGR Control Valve is a solenoid valve installed between the EGR cooler and the exhaust line that controls the EGR (Exhaust Gas Recirculation) amount by the ECM's duty control signal depending on engine load and the intake air demand. The Exhaust Gas R ...

© 2016-2020 www.kniro.net