Kia Niro: Body Side Molding / Fender Garnish Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Body Side Molding / Fender Garnish Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Loosen the fender garnish mounting screws.

2.	Using a remover, remove the fender garnish (A).

Install in the reverse order of removal.

Replace any damaged clips.

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. ...

Quarter Garnish Repair procedures

Replacement Put on gloves to protect your hands. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect the heads of the front seat occupants and the rear outboard seat occupants in certain side impact collisions. The curtain air bags are designed to deploy during ...

Kia Niro 2017 (DE HEV) Service Manual: Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low ...