Kia Niro: Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Removal
1.

Disconnect the negative(-) battery terminal.

2.

Remove the crash pad lower panel.

(Refer to Body - "Crash Pad Lower Panel")

3.

Remove the steering column upper and lower shrouds.

(Refer to Body - "Steering Column Shroud Panel")

4.

Disconnect the electronic steering column lock connector (A).

5.

Remove the electronic steering column lock (A).

(Refer to Steering System - "Steering Column and Shaft")

Installation
1.

Install the electronic steering column lock.

  

Do not reuse the shear bolts.

When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.

Tightening torque :

7.0 - 13.0 N·m (0.7 - 1.3 kgf·m, 5.0 - 9.4 lb·ft)

2.

Install the steering column.

3.

Install the crash pad lower panel.

ESCL(Electronic Steering Column Lock) Components and components location
Component ...

Electro Chromic Inside Rear View Mirror
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Motor Control Unit (MCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Power Cable [Engine Room Fuse & Relay Box, HPCU ↔ Auxiliary 12V Battery & High Voltage Battery System Assembly] 2. Power Cable [HPCU(Inverter) ↔ Hybrid Drive Motor] 3. Power Cable [HPCU(inverter) ↔ HSG & El ...

© 2016-2019 www.kniro.net