Peugeot 2008: Technical data / Engine technical data and towed loads

Peugeot 2008 2019-2021 Owner's Manual / Technical data / Engine technical data and towed loads

Engines

The engine characteristics are given in the vehicle's registration document, as well as in sales brochures.

Peugeot 2008. Engine technical data and towed loads The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).

For more information, contact a PEUGEOT dealer or a qualified workshop.

Weights and towed loads

The weights and towed loads relating to the vehicle are indicated on the registration document, as well as in sales brochures.

These values are also indicated on the manufacturer's plate or label.

For more information, contact a PEUGEOT dealer or a qualified workshop.

The GTW (Gross Train Weight) values and the towable loads listed are valid for a maximum altitude of 1,000  metres. The towable load must be reduced by steps of 10% for each additional 1,000 metres.

The maximum authorised nose weight corresponds to the weight permitted on the towball.

Peugeot 2008. Engine technical data and towed loads When exterior temperatures are high, the vehicle performance may be limited in order to protect the engine. When the exterior temperature is higher than 37°C, reduce the towed weight.

Peugeot 2008. Engine technical data and towed loads Towing even with a lightly loaded vehicle can adversely affect its road holding.

Braking distances are increased when towing a trailer.

When using a vehicle to tow, never exceed a speed of 62 mph (100  km/h) (observe the local legislation in force).

Technical data
...

Petrol engines
...

Other information:

Peugeot 2008 2019-2021 Owner's Manual: Gear efficiency indicator
This system helps reduce fuel consumption by recommending the most appropriate gear. Operation Depending on the driving situation and the vehicle's equipment, the system may advise skipping one or more gears. Gear engagement recommendations are only optional. In fact, the configuration of the roa ...

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description MAFS uses a sensing element made of a hot-film to measure the mass of intake air entering the engine and to send the signal to the ECM. A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents decelerati ...

© 2016-2021 www.kniro.net