Kia Niro: Engine And Transaxle Assembly / Engine Room Under Cover Repair procedures

Removal

Engine room under cover.

1.

Remove the engine room under cover (A).

Tightening torque :

3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb·ft)

2.

Install in the reverse order of removal.

Engine And Transaxle Assembly
...

Engine Mounting Components and components location
Components 1. Transaxle mounting bracket 2. Roll rod bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Wh ...

Kia Niro (DE HEV) Owners Manual: Non-operational conditions of parking assist system
Parking assist system may not operate normally when: 1. Moisture is frozen to the sensor. (It will operate normally when moisture melts.) 2. Sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when the material is removed or t ...

© 2016-2021 www.kniro.net