Peugeot 2008: Practical information / Engine compartment

The engine shown here is an example for illustrative purposes only.

The locations of the following elements may vary:

Petrol engine

Peugeot 2008. Engine compartment

Diesel engine

Peugeot 2008. Engine compartment

  1. Screenwash fluid reservoir
  2. Engine coolant reservoir
  3. Brake fluid reservoir
  4. Battery/Fuses
  5. Remote earth point (-)
  6. Fusebox
  7. Air filter
  8. Engine oil filler cap
  9. Engine oil dipstick

Peugeot 2008. Engine compartment The Diesel fuel system operates under very high pressure.

All work on this circuit must be carried out only by a PEUGEOT dealer or a qualified workshop.

Electric motor

Peugeot 2008. Engine compartment

  1. Screenwash fluid reservoir
  2. Engine coolant reservoir
  3. Brake fluid reservoir
  4. Battery / Fuses
  5. Remote earth point (-)
  6. Fusebox
  7. 400  V electrical system
  8. Emergency circuit-breaker for firefighters and maintenance technicians

For more information on the Charging system (Electric), refer to the corresponding section.

Bonnet
Stop & Start Before doing anything under the bonnet, you must switch off the ignition to avoid any risk of injury resulting from an automatic change to START mode. The location of the interi ...

Checking levels
Check all of the following levels regularly in accordance with the manufacturer's service schedule. Top them up if required, unless otherwise indicated. If a level drops significantly, have the corr ...

Other information:

Kia Niro (DE HEV) Owners Manual: If An Accident Occurs
Avoid the engine compartment. Avoid any orange or high voltage wires, cables, or components. Assume that a high voltage component is exposed and move away from the vehicle as promptly as possible. Refer to Chapter 7 for towing information. WARNING After parking the vehicle, shift ...

Kia Niro (DE HEV) Owners Manual: Opening the fuel filler lid
1. The fuel filler lid must be opened from inside the vehicle by pushing the fuel filler lid opener. ✽ NOTICE If the fuel filler lid does not open because ice has formed around it, tap lightly or push on the lid to break the ice and release the lid. Do not pry on the lid. If necessary, s ...

© 2016-2021 www.kniro.net