Toyota Corolla: If your vehicle needs to be towed / Emergency towing (vehicles with a towing eyelet)

If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for at most 50 miles (80 km) at under 18 mph (30 km/h).

A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition.

For vehicles with a continuously variable transmission, only the front towing eyelets may be used.

Emergency towing procedure (vehicles with a towing eyelet)

To have your vehicle towed by another vehicle, the towing eyelet must be installed to your vehicle. Install the towing eyelet using the following procedure.

1 Take out the wheel nut wrench(if equipped) and towing eyelet.

2 Remove the eyelet cover using a flathead screwdriver.

To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.

► 1.8 L 4-cylinder (2ZR-FAE) engine

Toyota Corolla. Emergency towing (vehicles with a towing eyelet)

2.0 L 4-cylinder (M20A-FKS) engine

Toyota Corolla. Emergency towing (vehicles with a towing eyelet)

3 Insert the towing eyelet into the hole and tighten partially by hand.

Toyota Corolla. Emergency towing (vehicles with a towing eyelet)

4 Tighten down the towing eyelet securely using a wheel nut wrench (if equipped) or hard metal bar.

Toyota Corolla. Emergency towing (vehicles with a towing eyelet)

5 Securely attach cables or chains to the towing eyelet.

Take care not to damage the vehicle body.

6 Enter the vehicle being towed and start the engine.

If the engine does not start, turn the engine switch to ON.

7 Shift the shift lever to N and release the parking brake. Vehicles with electric parking brake: Turn automatic mode off.

■ While towing (vehicles with a towing eyelet)

If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult.

■ Wheel nut wrench (vehicles with a towing eyelet)

Vehicle without wheel nut wrench: Wheel nut wrench can be purchased at your Toyota dealer.

Vehicle with wheel nut wrench: Wheel nut wrench is installed in trunk.

Towing with a wheel-lift type truck
► From the front Release the parking brake. Vehicles with electric parking brake: Turn automatic mode off. ► From the rear Use a towing dolly under the front wheels. NOTICE ■ Towing with a sli ...

If you think something is wrong
If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms Fluid leaks under the vehicle. (Water ...

Other information:

Kia Niro (DE HEV) Owners Manual: To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed. To return to the set speed, take your foot off the accelerator. If you move the lever down (to SET-) at i ...

Kia Niro 2017 (DE HEV) Service Manual: Smart Key Unit Components and components location
Components Connector Pin Information No. Connector A Connector B Connector C 1 Battery (+) IGN2 relay_output Immoblizer antenna (+)_output 2 Battery ...

© 2016-2022 www.kniro.net