Kia Niro: High Voltage Battery Cooling System / Description and operation

Operation

1. Cooling Fan
2. Cooling duct (inlet)
3. Outlet cooling duct (outlet)

Components and components location
Components Location 1. Cooling Fan 2. Cooling Duct (Inlet) 3. Cooling Duct (outlet) 1. Cooling Fan 2. Cooling Duct ( ...

Cooling Fan Specifications
Specification Current Item Specification Motor max current (A) Below. 3.8 Duty Duty (%) Fan ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad plate [LH] (A) after loosening the screws. ...

Kia Niro (DE HEV) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 minutes), stop at a suitable location. 2. • Connect connection hose (10) of the compressor directly to the tire valve. (18 inch tire only) • Connect the filling hose (3) of the compressor (clip mounted side) directly and then ...

© 2016-2020 www.kniro.net